Simple and economical Available in steel and stainless steel Set Screw Collars are the oldest
type of shaft collar. These units function by gouging the set screw into the surface of a soft shaft. They are a low-cost answer when frequent adjustment is not a consideration. Stocked in: Steel ...
- Total Width (in.): 1.250
- Material: Steel
- Bore Size (in.): 5
- Screw Size: 1/2-13 x 5/8
- Screw Type: SSS
Weight: 6560514
#2-32x1" (FT) PHIL PAN HEAD TAPPING SCREWS
TYPE B ZINC CR+3
- Diameter: #2
- Length: 1"
- Plating: ZINC CR+3
- Thread: COARSE
Weight: 6160529
Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Offered in High Strength, Low Profile and Heavy Duty styles Stocked in a variety of materials 1-Piece Clamp-
Type Shaft Collars are for use on standard round shafts, hard or soft, as well as on thin wall ...
- Total Width (in.): 1.000
- Material: Aluminum
- Bore Size (in.): 5
- Screw Size: 1/2-20 x 1-1/4
- Screw Type: SHCS
Weight: 4360517
Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Offered in High Strength, Low Profile and Heavy Duty styles Stocked in a variety of materials 1-Piece Clamp-
Type Shaft Collars are for use on standard round shafts, hard or soft, as well as on thin wall ...
- Total Width (in.): 1.000
- Material: Steel
- Bore Size (in.): 5
- Screw Size: 1/2-20 x 1-1/4
- Screw Type: SHCS
Weight: 4360517
Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Offered in High Strength, Low Profile and Heavy Duty styles Stocked in a variety of materials 1-Piece Clamp-
Type Shaft Collars are for use on standard round shafts, hard or soft, as well as on thin wall ...
- Total Width (in.): 1.000
- Material: Stainless Steel
- Bore Size (in.): 5
- Screw Size: 1/2-20 x 1-1/4
- Screw Type: SHCS
Weight: 4360517
Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Offered in High Strength, Low Profile and Heavy Duty styles Stocked in a variety of materials 2-Piece Clamp-
Type Shaft Collars are for use on standard round shafts, hard or soft, ...
- Total Width (in.): 1.000
- Material: Steel
- Bore Size (in.): 5
- Screw Size: 1/2-20 x 1-1/4
- Screw Type: SHCS
Weight: 4360517
Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Offered in High Strength, Low Profile and Heavy Duty styles Stocked in a variety of materials 2-Piece Clamp-
Type Shaft Collars are for use on standard round shafts, hard or soft, ...
- Total Width (in.): 1.000
- Material: Stainless Steel
- Bore Size (in.): 5
- Screw Size: 1/2-20 x 1-1/4
- Screw Type: SHCS
Weight: 4360517
Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Offered in High Strength, Low Profile and Heavy Duty styles Stocked in a variety of materials 1-Piece Clamp-
Type Shaft Collars are for use on standard round shafts, hard or soft, as well as on thin wall ...
- Total Width (in.): 0.875
- Material: 316 Stainless Steel
- Bore Size (in.): 5
- Screw Size: 1/2-20 x 1-1/4
- Screw Type: SHCS
Weight: 4360517
Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Offered in High Strength, Low Profile and Heavy Duty styles Stocked in a variety of materials 2-Piece Clamp-
Type Shaft Collars are for use on standard round shafts, hard or soft, ...
- Total Width (in.): 0.875
- Material: Aluminum
- Bore Size (in.): 5
- Screw Size: 3/8-24 x 1
- Screw Type: SHCS
Weight: 4360517
Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Offered in High Strength, Low Profile and Heavy Duty styles Stocked in a variety of materials 2-Piece Clamp-
Type Shaft Collars are for use on standard round shafts, hard or soft, ...
- Total Width (in.): 0.875
- Material: 316 Stainless Steel
- Bore Size (in.): 5
- Screw Size: 3/8-24 x 1
- Screw Type: SHCS
Weight: 4360517
2-piece clamp style with additional set screw Can be placed anywhere on shaft Low Profile Style 2-Piece Clamp-
Type Shaft Collars with Set Screw are for use on standard round shafts. They can be completely disassembled and placed anywhere on a shaft. Precision machined, easy to adjust, with high clamping ...
- Total Width (in.): 0.875
- Material: Steel
- Bore Size (in.): 5
- Screw Size: 3/8-24 x 1
- Screw Type: SHCS
Weight: 4320507